In the previous article, we focus on the main aspects that we should pay attention to when we buy LED light strips for the first time. Now let’s move on to the next step. Installation The installation of LED strips can be very simple or difficult, but ultimately it depends on the final result you want to achieve with the lighting system. For example, introducing a 1 meter long LED light into a kitchen cabinet can be much simpler than dressing a club and using a 20 meter RGB LED strip to run it on a DMX control. Whatever you do, you must find some universal things, and this article will guide you through some of them.
Let’s start with the LED strip lighting Sydney itself. It consists of a long-impact flexible circuit board, located along the surface mounted device or SMD. There are some things to consider that include LED per meter, LED chip size, colour and length of the light strip. Strip lights are available with 2 LEDs per meter, 30 LEDs per meter and 60 LEDs per meter. As the name implies, the latter has twice the LED and is much brighter than the first. They are designed to be used in lighting environments to compete with backlighting. For example, if you want to use it in an environment with natural light, such as a shop window, or add it to a room that already has normal lighting and keep it visible, you must choose 60 LEDs per meter. The clearest light output is suitable for this purpose. In addition to this, 30 LED strips per meter can handle most other lighting devices, such as club settings or any other place where you don’t have to compete with backlighting.
When you look at the specifications of the strip lights, you can usually see a series of four numbers that may not mean much to most people. They represent the size of the individual LEDs on the strip. Typically, the chip size is 5050 (5mm x 5mm) or 3528 (3.5mm x 2.8mm). The main difference between the sizes of these two types of chips is the consistency of the light they produce. Smaller LEDs produce more irregular and irregular effects, while larger LEDs provide more uniform light diffusion.
The led strip lighting is normally available in three main colours, including warm white, cold and interchangeable RGB. Two of the former add elegant ambient lighting to the commercial and domestic settings, while at the same time they are not as glamorous as the result. They can add floor or accent lighting to aesthetically improve the appearance of the interior, or add functionality that can be used as a work light to help work in the kitchen, bathroom or office. RGB LEDs directly replace old disco lights and offer thousands of programmable effects. As a rule, it works directly from the remote control, which works with the red-eye sensor connected between the strip light and the transformer. But DMX control is also an option. This is a form of advanced effects programming that uses industry-standard signals to control the brightness, colour and frequency of lights. Check this link https://idealled.com.au/ to find out more details.
The most obvious consideration is the exact length of the strip light required. This depends on how complex the nature of the configuration and the intentions. In general, most lighting arrangements can be achieved with a single strip. Strip lights come in reels of 5 and 10 meters by default, but you can order longer or shorter order lengths, so check with your supplier. You can increase or decrease the length of the light strip yourself. To reduce the length of the strip, simply cut the strip at one of the cutting points at intervals of approximately 5 cm along the length of the light. To join two pieces of strips to increase the length of the light, you will need a soldering iron and some core cables. Solder each positive and negative welding point at the end of the light strip, cut this wire and do the same on the other strip to complete the connection. This method allows you to get some extra length, especially when passing through a large corner.